[ICOM] Re: PW-1 and such

[Dr. Howard S. White]

Running a PW-1, IC-756 Pro3, SteppIR MonstIR and a couple of Computers
through a CT-17... all talk together fine...

Have no idea about the Kenwood...

__________________________________________________________
Howard S. White Ph.D. P. Eng., VE3GFW/K6  ex-AE6SM  KY6LA
Website: www.ky6la.com
"No Good Deed Goes Unpunished"
"Ham Antennas Save Lives - Katrina, 2003 San Diego Fires, 911"

----- Original Message ----- 
From: "Tony Visco" <ahv73 at verizon.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Saturday, December 10, 2005 5:58 AM
Subject: [ICOM] Re: PW-1 and such


OK you guys,

Here are my questions of the week.
I am a new owner of a used PW-1.  I have the amp talking to my 746pro.  I
also have a Kenwood 940s that I thought I had a way to power up the antenna
component but no success.  Currently I need to have the 746pro on to operate
the TS-940.

No. 1:  I tried using a 12V power supply that would come on when the Kenwood
would turn on.  Nothing happened.  I did connect the pin configuration as
indicated in the PW-1 manual.  So am I missing something here.

No. 2:  The CI/V connection seems only dedicated to the PW-1.  I can no
longer jumper my computer interface (TRX Manager) to the rig or my Steppir
antenna interface.  When I connect the jumper to add the TRX connection to
my computer, neither works.  I love all these toys but as with computer
technology in the 1980's the inter-relationships were simply not always
worked out.  I am anxoius to see if  anyone has a solution for this little
nusiance.

Thanks in advance and have a very happy holiday season,
Tony   K 3 I P T

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/