[ICOM] Problem With 756 Pro

[Constantine Thomas]

I wonder if  this is the same problem as with the 751A(it sounds like it) 
with the trim caps.
Then again if you had a shorted diode in the filter board or a stuck relay 
it would do the same, knock out a band
I'm dying to find out what the problem is.
Constantine
WA1WLA




----- Original Message ----- 
From: "Duane Fischer" <dfischer at usol.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Saturday, December 10, 2005 10:23 PM
Subject: [ICOM] Problem With 756 Pro


> My Icom 756 Pro has suddenly lost the receive and transmit from 2000-5999
> KHZ. two weeks ago when I used it on 3.976 MHZ lsb it was fine.
> All other frequencies work fine. Antennas are fine.
> Is there some button on this rig that the old blind man might have
> accidentally pressed and disabled this frequency range? Ideas gentlemen?
> Thank you.
> Duane Fischer, W8DBF dfischer at usol.com
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.371 / Virus Database: 267.13.13/195 - Release Date: 12/8/2005
>
>