[ICOM] Re: IC761 on PSK

[Paul Gates, KD3JF]

You are absolutely correct. I did the same on my 761MKIIG. You must not turn the processor on! I have the Signalink SSL1+ also and it works wonderfully. If you need a refresher course on the soundboard settings refer to the article in the Oct. QST 2003.
   
  Paul, KD3JF
  Glen Burnie, MD

sasi nayar <vu3snm at yahoo.com> wrote:
  Alan
It has to do with the sound card settings. I had
similar problems interphasing my Signalink SL1+ from
Tigertronics (with my IC706MKII) the very forst time.
I opened up the interphase and tweaked the Tx gain
potentiometer (there should be two - one for Rx gain
and othe other for Tx gain) on tune mode until I got
enough power out a fixed setting (about 50 Watts in my
case at pwr level of 6 on the 706MKII). That worked
for me. I would not recommend turning the compressor
on.
Hope this helps
73
Sasi
VK5SN







__________________________________________ 
Yahoo! DSL – Something to write home about. 
Just $16.99/mo. or less. 
dsl.yahoo.com 

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
  



Paul Gates, KD3JF
K1 #0231
KX1 #1186
XG1