[ICOM] IC2100H

[Jerry bishop]

Hi- On some of these the cap on the under side of the board breaks loose 
.Have to take the board loose ,so you can get to the solder points .Hope 
this will help .Fixed mine .De Jerry W8KQ
----- Original Message ----- 
From: "Jim Vohland" <n9vo at hotmail.com>
To: <icom at mailman.qth.net>
Sent: Saturday, August 27, 2005 4:33 PM
Subject: [ICOM] IC2100H


> While on way to work today, the 2100 mobile stopped transmitting. NO 
> indication of radio going into transmit at all instead of no output. 
> Thinking perhaps it is a mic problem but at work unable to try another 
> mic. Guess the mic from a 207 will at least key it up. Just wondering if 
> anyone would have experienced this before. I did try a reset and no 
> change. Buttons on ther mic seem to work, it just will not key the radio 
> to xmit. Any input????
>
> 


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005