[ICOM] IC-775DSP - KeyerHELP PSE wiring idea

[Malcolm Ringel]

Hey Larry ....and thanks for that suggestion ....it may well be an end 
solution, as I am "unlearnable" at this stage on the squeeze techniques....I 
guess I could also simply use my J-38, but I would rather that be voluntary, 
if you know what I mean.
I am truly stymied (not the first time!), as this is not supposed to be all 
that difficult ....

Thanks again.......73, Malcolm. K3KZ
----- Original Message ----- 
From: "Larry Winslow" <larry_w at comcast.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Friday, August 12, 2005 5:15 PM
Subject: Re: [ICOM] IC-775DSP - KeyerHELP PSE


> If all else fails, you could disconnect the "dah" lead from the 
> "electronic key" plug and wire it to a plug to go to the manual key jack. 
> It's crude but should accomplish what you're looking for.
>
> 73 - Larry WØNFU
> larry_w at comcast.net
>
>
> At 01:51 PM 8/12/2005, you wrote:
>
>>Hans and the group:
>>This setting does not do it...."paddle" (n for normal) gives me automatic 
>>"dits" to the right and automatic "dahs" to the left.
>>I have used this paddle for years and it works FB on the PRO, PRO II and 
>>PRO III, each of which has a "bug" setting in its menu. It may be that the 
>>775 simply does not have that bug (or some equivalent) setting, as I sure 
>>can't find it , H I. ...although that would somehow be surprising.
>>Any further thoughts from anyone ? Could it be that the 775 requires a 
>>different plug configuration ? I don't think so ... but any ideas ?
>>My paddle is NOT an iambic squeeze, but a modern Vibroplex which is 
>>designed to act as the old type bug...i.e. thumb on paddle to the right 
>>produces an automatic series of "dits" and forefinger on the paddle to the 
>>left produces a solid unbroken tone , i.e. an extended "dah" that stays 
>>until I release the contact.
>>Any advice on this would be greatly appreciated.
>>Thanks & 73
>>Malcolm Ringel, K3KZ
>>
>>----- Original Message ----- From: "Hans Remeeus" <hans at remeeus.nl>
>>To: "ICOM Reflector" <icom at mailman.qth.net>
>>Sent: Tuesday, August 09, 2005 2:01 AM
>>Subject: Re: [ICOM] IC-775DSP - Keyer Polarity
>>
>>
>>>Hallo Malcolm,
>>>
>>>Push [SET] shortly;
>>>If you are in a Sub Menu first push [ENT] to enter the main menu of the 
>>>P-set mode;
>>>Push [DOWN] or [UP] until you see [PUSH SEt ] left & [ELECSEt] right on 
>>>the display;
>>>Push [SET];
>>>Push [DOWN] or [UP] until you see [PAdLE] right on the display;
>>>Turn the Main Dial to set the value between [r] which means reversed or 
>>>[n] which means normal;
>>>Push [ENT] to exit the Sub menu and again [ENT] to exit the Main menu;
>>>That's all.
>>>
>>>Good luck and enjoy your IC-775DSP (great analoge rig)!
>>>
>>>
>>>73, Hans Remeeus (PA1HR)
>>>http://www.remeeus.nl
>>>Communication is about people, the rest is technology.
>>>
>>>
>>>---- Original Message ----
>>>From: "Malcolm Ringel" <mringel at bluecrab.org>
>>>To: <we1x at comcast.net>
>>>Cc: <icom at mailman.qth.net>
>>>Sent: Tuesday, August 09, 2005 6:59 AM
>>>Subject: Re: [ICOM] Want Icom R8500
>>>
>>>>BTW, yes, I did buy the 775 and really like it. It is so "retro" in
>>>>so many ways, particularly for me, as I haven't had a BIG radio since
>>>>my FT1000D some 8-10 years ago.
>>>>Q on 775: I use a bug-style keyer, IOW, push left on keyer paddle
>>>>gives steady unbroken "dah" and push right gives "dits" of variable
>>>>lengths, speed, etc.
>>>>All of my recent radios Icom & Yaesu have had an internal menu
>>>>setting in the keyer sub-menu which, for example in my PROIII and
>>>>PROII I think it actually says "bug".
>>>>I cannot find it in the 775 or any specific reference to it in the
>>>>manual. Can you help ??? Can any list member help ?
>>>>Thanks
>>>>Malcolm, K3KZ
>>>
>>>----
>>>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>>>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>Icom FAQ: http://www.qsl.net/icom/
>>>
>>
>>
>>----
>>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>Icom FAQ: http://www.qsl.net/icom/
>>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>