[ICOM] IC7400

GGLL nagato at arnet.com.ar
Wed Sep 8 23:52:04 EDT 2004


Hello Guenter, most common cause, could be that infamous (IC 151) driver chip. 
But, first of all, check RF power setting.

See:

http://www.qsl.net/oz2m/ham/ic746pro

http://www.qsl.net/k5lxp/projects/746Pro/746ProNoTX.html

Best regards
Guillermo - LU8EYW.

guenter at dk1ri.de escribió:
> Since some days my IC7400 (IC746PRO) has a max Power of 1 W only for all
> mods.
> Also 2m has some watts only (cannot measure exactly).
> Modulation and complete RX is ok.
> 
> I had this problem about 1 year before, but the problem disappared after
> short t
> ime, may be after a reset.
> 
> Reset did not worked this time.
> 
> Is this a known problem? Any ideas (except sending the rig to ICOM  :)))?
> 
> 73 + tnx
> guenter dk1ri
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 


More information about the Icom mailing list