[ICOM] IC-910 H memory problems

[Gary Fiber]

Jim,

Once you have the Freq, dup direction, tone all set in VFO and it is 
working then you pressed up Down button to select the memory channel you 
want to program, pressed the MW 4 button and held it for 1 sec.
Now you press the V/M 1 button to go into memory mode and what you 
programmed are not there? Page 41 of the 910H manual is what I am reading 
"Programming in VFO mode" should get you through it.  Do you have the beeps 
enabled. There should be a series of beeps when the channel is programmed.

Gary K8IZ

We have just started a new repeater in our area and I am finding it
>impossible to lock it into memory.  I follow the instructions
set everything
>in the VFO mode and save.  It seems to indicate that I have it in a memory.
>However, if you bump the vfo knob or the rig looses power, I loose the tone
>and dup settings.  Anyone have a clue as to what I must be doing wrong?
>Thanks
>John KB9TPG

Gary Fiber K8IZ
GROL PG-19-6691
Washington State Resident