[ICOM] Filter recommendations

[Frank A. Ellis]

Hi,

The FL-53 has been done in the IC-756, and was
documented. Have a look at the slideshow Adam Farson
put together from my pictures, taken when I installed
an FL-53 in my IC-756:

http://www.qsl.net/icom/ic756/slides.html

It is a close fit, but can be done. You have to remove
the filter clip from the PCB as well as the sockets
intended for the filter pins, and then solder the
filter in directly. It works great.

73, Frank W3UHF



> I would suspect the FL52 or 53 will not fit, really
> the case closure is the 
> trouble. Others here may have one of those laying
> about to try or the 
> height of the filter so you could measure it up.
> 
> Gary K8IZ


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com