[ICOM] IC910H Question

[Van van Bergen]

Thanks Randy

73
Van
----- Original Message ----- 
From: "William Lambing" <w0lpq9 at msn.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Thursday, September 30, 2004 7:10 PM
Subject: Re: [ICOM] IC910H Question


Van, the 910 will do Sat operation with the push of a button.  Do not 
remember if it will do what you ask.  However, the radio has individual RF 
I/O's for V/U driving separate antennas.  It does appear that if you run the 
thing in Sat mode, then yes, it would do Cross Band.  I know that you can 
listen on either VHF or UHF and transmit on one or the other.  Individual 
receivers, but only one transmit function, either UHF or VHF at a time.

Darn good radio.  I sold mine since I did not use UHF much at all.  With the 
addition of a preamp for either UHF or VHF, makes a solid Sat Radio.

Go to Mods.dk and look at the manual if you do not have one.  It will come 
down as a Zipped file.  Takes about 20 minutes if you are dial in.

73

Bill, W0LPQ
----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/