[ICOM] IC765 Loose readout cover

[John L Merrill]

William Diamond wrote:
> Yes, there are small screws under the strip.  Heat with a hair drier and use
> a small point needle and lift a corner and it will come right off...
> 
> 
> 
>       William J. Diamond
>        Rogers, Arkansas
> 
>     Ham Radio Operator WR0T
> 
>    Please Visit My Radio Site
>         wjdiamond.com
> 
> 
> 
> -----Original Message-----
> From: icom-bounces at mailman.qth.net
> [mailto:icom-bounces at mailman.qth.net]On Behalf Of John L Merrill
> Sent: Saturday, June 19, 2004 7:17 PM
> To: ICOM
> Subject: [ICOM] IC765 Loose readout cover
> 
> 
> I have an IC765 that has a slightly loose plexiglass cover over the readout-
> S meter. Are their screws under the strip that has the Logo and model# on
> it; and if so does it come off easlily or do I have to take the front panel
> off the radio to get at it. Any hints would be appreciated. The service
> manual does not show anything.
> 
> 73,
> John N1JM
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 
Thanks and 73.