[ICOM] IC 756 Display and N4PY Software

[Dave Bernstein]

All Icom HF transceivers controllable via CI-V enable the PC to read the
transceiver's frequency and mode.

    73,

       Dave, AA6YQ

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
On Behalf Of Carl Moreschi
Sent: Thursday, June 10, 2004 07:47
To: ICOM Reflector
Subject: Re: [ICOM] IC 756 Display and N4PY Software


It looks that way looking at the command set but I think all the basic
ICOM CIV commands are really there.  I have decided I will add the 756
to my program.  This will allow good frequency, mode and filter control
through the 30 band buttons my program provides.  The major function my
program provides that I will not be able to have for the 756 is the
spectrum sweep. This is because the 756 does not have an S meter read
command.  But I will be able to provide an button for Ant 1/2 control.
I should have the 756 additions ready in my program in about a week.

73,

Carl Moreschi N4PY
Franklinton, NC
----- Original Message -----
From: "MikeR" <nf4l at nf4l.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Thursday, June 10, 2004 10:03 AM
Subject: Re: [ICOM] IC 756 Display and N4PY Software


> Carl -
> Am I correct that the 756 command set does not provide for reading 
> back in the freq and mode? 73, Mike NF4L
> ----- Original Message -----
> From: "Carl Moreschi" <n4py at earthlink.net>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Wednesday, June 09, 2004 7:00 PM
> Subject: Re: [ICOM] IC 756 Display and N4PY Software
>
>
> > I could add some code to my N4PY ICOM program and support the 756 
> > very easily.  But the 756 command set only really supports setting 
> > frequency, mode, split on/off, dualwatch on/off.  I can completely 
> > control
frequency
> > and mode this way from the program.  My question is would this help
people
> > with a 756 and burned out display.  Will you be able to set things 
> > like
> mic
> > gain, power output, etc. without a display?
> >
> > Carl Moreschi N4PY
> > Franklinton, NC
> > ----- Original Message -----
> > From: "w3jo" <w3jo at msn.com>
> > To: "ICOM Reflector" <icom at mailman.qth.net>
> > Sent: Wednesday, June 09, 2004 9:04 PM
> > Subject: Re: [ICOM] IC 756 Display
> >
> >
> > >      Like so many of the guys that have had the dreaded 756
'horizontal
> > blue
> > > lines', mine is setting on  a shelf, blue lines and all, just 
> > > collecti
ng
> > > dust. What a waste of a fairly good radio.
> > >
> > >      Just what is a fella/gal supposed to do with these radios. 
> > > Only
the
> > > Lord knows just how many are in the same situation as us. For all
> > practical
> > > purposes, they are almost worthless now. Nobody would want them I 
> > > am
> sure.
> > I
> > > am curious to know just how many are out there with this problem.
> > >
> > >                                                         73, 
> > > Joe...W3JO
> > >
> > >
> > >
> > > > It's only a matter of time before the blue lines appear !!  Hope

> > > > for
> > your
> > > > sake that I am wrong!!  Been there & done that!!  Willy K3VW
> > >
> > >
> > > ----
> > > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net 
> > > Icom Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: 
> > > http://www.qsl.net/icom/
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom 
> > Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: 
> > http://www.qsl.net/icom/
> >
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom 
> Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: 
> http://www.qsl.net/icom/

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom
Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/