[ICOM] Fw: 706 euro/jap version

[Ken]

VERY good response Cliff - and you do know the members of these boards don't
you:)

Ken H>
K9FV

----- Original Message ----- 
From: "Clif Holland" <clif at avvid.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Tuesday, June 08, 2004 7:49 AM
Subject: Re: [ICOM] Fw: 706 euro/jap version


> The HF mod for the 706 is easy. The VHF mod is not and I don't know if it
> will help or not. It takes about an hour to do the VHF mod.
>
> Before everyone jumps up and screams "It's only a diode" I said 706 not
MKII
> or MKIIG. Go look up the 706 mod before you say anything.
>
> Clif Holland, KA5IPF
> AVVid
> Authorized Kenwood and Icom Service Center
> 816 W Shady Grove Rd
> Irving, TX 75060
>
> www.avvid.com
>
> 1-800-214-5779
> 972-870-0630 (Local)
> ----- Original Message ----- 
> From: <jackiv at juno.com>
> To: <icom at mailman.qth.net>
> Sent: Monday, June 07, 2004 9:16 PM
> Subject: [ICOM] Fw: 706 euro/jap version
>
>
> > This is for cliff  at avid, can you answer?
> > --------- Forwarded message ----------
> > From: jackiv at juno.com
> > To: icom at mailman.qth.net
> > Date: Sun, 6 Jun 2004 08:56:26 -0500
> > Subject: 706  euro/jap version
> >
> > HI ALL--I have the 706 version which limits the 2 meter band to 144 mhz.
> > How do I open this up? Or can someone do this and check the radio and
mod
> > all to the new
> > band segments.  (I have a high impedance head, tubes ok, semis not!!)
> > old jack                      jackiv at juno.com
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
> >
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>