[ICOM] CI-V commands for determing the state of Split andDualWatch

[Dave Bernstein]

Thanks, Mike. Commander also provides a facility for sending arbitrary
transceiver commands and capturing the response, but I don't have any of
the transceivers with the expanded CI-V instruction set. It sounds like
Ekki DF4OR already went looking for the required commands and came up
empty.

   73,

        Dave, AA6YQ

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
On Behalf Of MikeR
Sent: Saturday, July 31, 2004 18:18
To: ICOM Reflector
Subject: Re: [ICOM] CI-V commands for determing the state of Split
andDualWatch


Hi Dave -
I went looking, and I don't see 'em either. I find it really curious
what ICOM left out, and just as curious, what the documentation doesn't
document - the skimpy listing for the 756, and nothing in the later
manuals about choosing a filter - I got jogged into realization on that
one from a 706II manual. It's probably in there somewhere. I find the
little app "ICCommand" on Ekki's site useful and easy for experimenting.
If you find an answer, please post it and I'll do the same. Maybe we
could talk Ekki or Adam into setting up a page for "Raiders of the Lost
Codes". 73, Mike NF4L

----- Original Message ----- 
From: "Dave Bernstein" <aa6yq at ambersoft.com>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Saturday, July 31, 2004 5:20 PM
Subject: [ICOM] CI-V commands for determing the state of Split and
DualWatch


> The previous generation of Icom transceivers provides CI-V commands 
> for enabling or disabling the Split and DualWatch functions, but no 
> means of "reading" the state of these functions. I assumed that this 
> oversight had been corrected in the expanded CI-V command sets 
> introduced with the 746 Pro, 756 Pro, 756 Pro II, and 7800, but on 
> reviewing the documentation, I see commands to send/read the state of 
> Quick Split, Split Lock, and Quick DualWatch, but no means of reading 
> the state of Split or Dual Watch. Am I overlooking the obvious, or is 
> the documentation in error? Do these transceivers provide CI-V 
> commands for reading the state of Split and DualWatch? If so, I'd 
> appreciate a pointer to the information, or the information itself.
>
> I've already checked Ekki DF4OR's CI-V site, without success.
>
>     73,
>
>        Dave, AA6YQ
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom 
> Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: 
> http://www.qsl.net/icom/
>


----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom
Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/