[ICOM] Icom765 transmit problems

[Larry]

This is probably way out but could explain your problem. If the rig is in 
"split" mode and the not-receive vfo is outside the ham bands, the 765 
won't transmit.

73 - Larry WØNFU
larry_w at comcast.net



At 07:13 PM 7/27/2004, you wrote:

>My Icom 765 will not transmit.  I had not been on the air for several 
>months and when I tuned up the rig everything seemed to be performing 
>normally.  Suddenly, the radio would not transmit although the receive was 
>fine.  No matter what band or mode I try the red transmit light does not 
>light and the rig will not transmit at all. Does anyone have any ideas ?
>
>Thanks
>
>Doug  KF8VS
>
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/