[ICOM] IC-706MGII HF/6 antenna connector

[Gene Sailsbury]

Tom thanks for your suggestion.  Works great.  Now I can switch back and
forth.
73
Gene N0MQ
----- Original Message ----- 
From: "Tom Norris" <r390a at bellsouth.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Saturday, July 03, 2004 9:35 PM
Subject: Re: [ICOM] IC-706MGII HF/6 antenna connector


> Gene, the switch does not care which is an input and
> which is an output. Just connect your 2 antennas to
> the two "outputs" of the switch and the "input" of the
> switch to the HF/6 (top) connector on the 706 and
> switch between antennas rather than messing with
> swapping connectors.
>
> Tom NU4G
>
> >I use HF and 6 meters and hate to keep changing antennas on the back of
the
> >706.  Is there away to keep both HF and 6 meter antennas on at all time.
> >The only coax switch I find is 2 outputs with 1 input.  I need 2 inputs
and
> >1 output.  Can some one help me on this.
> >Thanks
> >73
> >Gene N0MQ
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/