[ICOM] Re: 756ProII: Compatible with the IC-2KL Amp?

[Tom Norris]

Take a look at the diagram on my web site,
is the same as what Adam said, but just the
particular diagrams without loading the whole
manual -

http://www.fernblatt.net/misc_files/radio/756_ic2kl.gif

And for 2kl plus at-500

http://www.fernblatt.net/misc_files/radio/756_at500.gif


This is from the 756Pro manual. The 2KL was discontinued
when the ProII came out. No difference in amp connection
between the three 756 models that I have noticed in use.

Tom, NU4G


>BlankHello Group:
>
>Will the IC-2KL work with the ProII?  I believe it will but the ProII
>manual does not make mention of it.
>
>I'm making the assumption that the band data on the back of the ProII
>goes to the band data input on the 2KL?
>
>Also is there a separate PTT line between the rig and amp?
>
>I'd like to get hold of a 2KL to go with my Pro for a remote controlled
>station setup.  If theres a separate PTT line between the two I could
>use a relay to break the PTT line so I could take the amp on/off line.
>
>Thanks in advance.
>
>73,
>
>Rich Thorne
>ARS: N5ZC
>AMA: N5ZC
>Amarillo, TX