[ICOM] 756ProII: Compatible with the IC-2KL Amp?

[Adam Farson]

Hi Rich,

The answer to your question is: absolutely yes. You will need an OPC-118
adapter (24-pin male Molex to female DIN ACC(1) and ACC(2) ) to connect the
IC-2KL control cable to the Pro2.

The 2KL manual does not mention the Pro2, because the Pro series did not yet
exist when Icom discontinued the 2KL. The PTT and ALC lines are incorporated
in the control cable; no separate PTT cable is required. IC-2KL user manuals
and schematics are downloadable here:

http://www.qsl.net/icom/manuals.html (incl. 10/12m enabling procedure)

http://www.icomclassic.com/

I recommend the AT-500 autotuner as a companion to the IC-2KL. The IC-2KL
control cable plugs into one of the 24-pin Molex sockets on the AT-500; the
cable to the exciter goes to the other socket. AT-500 documentation is
available via the links shown above.

A better way to enable/disable the 2KL is to remote the "Linear Off/On"
switch function via a small relay. This has an advantage over switching the
PTT line, in that it also powers down the amplifier's control and protection
circuits, as I recall.

Cheers for now, 73,
Adam VA7OJ/AB4OJ




-----Original Message-----
From: icom-bounces at mailman.qth.net
[mailto:icom-bounces at mailman.qth.net]On Behalf Of Richard Thorne
Sent: Saturday, July 03, 2004 16:32
To: icom at mailman.qth.net
Subject: [ICOM] 756ProII: Compatible with the IC-2KL Amp?


BlankHello Group:

Will the IC-2KL work with the ProII?  I believe it will but the ProII
manual does not make mention of it.

I'm making the assumption that the band data on the back of the ProII
goes to the band data input on the 2KL?

Also is there a separate PTT line between the rig and amp?

I'd like to get hold of a 2KL to go with my Pro for a remote controlled
station setup.  If theres a separate PTT line between the two I could
use a relay to break the PTT line so I could take the amp on/off line.

Thanks in advance.

73,

Rich Thorne
ARS: N5ZC
AMA: N5ZC
Amarillo, TX


----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/