PROBLEM SOLVED: [ICOM] Fw: IC706mk2g going to TX

[R. Johansen]

Hello
Problem solved ,some solder remains laying around in the radio nearby the MIC connector in  the rear,
removed and 100% function again.

THATS REALLY BAD, ICOM !!!!!!!!!!!!!!!!!!!!!!!!!!


73 Rune LA8GKA
NORWAY

----- Original Message ----- 
From: "R. Johansen" <patradio at start.no>
To: <icom at mailman.qth.net>
Sent: Saturday, July 03, 2004 8:12 PM
Subject: [ICOM] Fw: IC706mk2g going to TX



Hello

I have a 3 months old Icom 706MK2G which has begin to send at no reason at once you turn it on.
Have disconected mic and tryed to reset the radio at no use..

Anybody who have an idea??

Radio have never been used with any other connections than antenna,power and remote frontpanel (no PA)


73 Rune LA8GKA
----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/