[ICOM] PW-1 problem

[VE6JY Don Moman]

Chuck, the 756PROII and the PW-1 will talk just fine at 1200 baud, and
therefore is completely at one with TRlog.  I have used this combination for
years and even at 1200 baud, it switches quickly and reliably enough that I
haven't even bothered to bump it up to 4800 baud.

73 Don
VE6JY

----- Original Message ----- 
From: "Adam Farson" <farson at shaw.ca>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Friday, December 31, 2004 08:52
Subject: RE: [ICOM] PW-1 problem


> Hi Chuck,
>
> Perhaps it would be worth while to contact the TRLog programmers, and
point
> this out as a deficiency in their product.  Given that quite a number of
> Icom owners run the PW1, a logging program should support the optimum data
> rate for the PW1 (9.6 kb/s).
>
> Cheers for now, 73,
> Adam VA7OJ/AB4OJ
>
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
On
> Behalf Of Chuck Kresge
> Sent: 30 December 2004 06:41
> To: ICOM Reflector
> Subject: [ICOM] PW-1 problem
>
> Thanks to all who responded to my request for help on my PW-1 problem.
>
> I conclude that there is no grounding wire to be attached when removing
the
> remote controller.
>
> I also conclude that I must set the IC-756PROII baud rate to 9600 to match
> the PW-1 to get the PW-1 to follow band changes on the 756. I am committed
> to using TRLog for my station operation (switching antennas and bandpass
> filters and stubs) and logging and TRLog does not allow 9600 baud. 4800
baud
> is required and works perfectly with the 756. But this is no big problem
as
> I can quickly change bands on the PW-1 by pushing the up or down buttons
on
> the remote console.
>
> Thanks-Chuck DU3NXE
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Win a new
> Icom IC-756 PRO III and help QSL/QTH.net Details at:
http://mailman.qth.net/
>
>
> Scanned by WinProxy
> http://www.Ositis.com/
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Win a new Icom IC-756 PRO III and help QSL/QTH.net
> Details at: http://mailman.qth.net/