[ICOM] IC-2SAT help needed

[Doug Faunt N6TQS +1-510-655-8604]

It looks as if all the applicable items are on a small board called the
"PRT Unit" on the schematic.  If you can receive an image via email, I
could easily scan that and surrounding area of the schematic and send
it to you.

OTOH, I no longer own a IC2SAT but have a service manual (original
ICOM).  Make an offer for the whole book and I'll consider it.

73, doug

   Date: Tue, 10 Aug 2004 22:31:13 -0300
   From: Reed Park <reedpark at nbnet.nb.ca>

   Hi Group

   Buddy of mine has a problem with his IC-2SAT handheld. It works
   if external DC is applied via the DC jack. radio does NOT work
   with either the battery pack or the internal batteries. He has had
   both packs rebuilt by a local battery place (no problem with packs
   they have done in the past). Both packs check out AOK, but the
   radio does not work with either of them. I am looking for a schematic
   of the board located at the bottom of the radio, just beneath the
   internal battery pack. Any ideas where I might find it on the internet ?

   I have checked a few MODS sites with no luck, and have done a google
   search with also no luck. I would be very willing to pay for any copy charges
   etc. if a hard copy were all that is available.

   7 3
   Reed

   --


   Looking for information on

	Marconi SMR-3
	Marconi MSL-5 and
	Northern Electric R8119A receivers of WW 2.

	ARROW Research (Avro CF-105)
	Reed Park
	252 Gauvin Road
	Dieppe, New Brunswick
	Canada E1A1M1

	Amateur Radio V E 1 N U
	WW II, # 19 SET user
	Paraset replica builder and owner of a real one.



   ----
   Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
   Icom Users Net: Sundays, 1700Z, 14.316 MHz
   Icom FAQ: http://www.qsl.net/icom/