[ICOM] 2KL Pwr supply

[Gary Fiber]

Yes but the 2KL uses 40 or 48 volts at some 20 amps of current. If the 
transformer is good and it does not power up, I think it needs to be 
attached to the 2KL or jumped as you suggest, then it would probably be a 
good purchase at that price. Its a linear supply, not to much to go wrong 
with it.
I don't see many 40 or 48 volt, 20 amp supplies on the market.

Gary K8IZ

>Wow!  Someone had bid $75.00 for an old P.S. that the owner clearly states 
>it does not appear to work.  Maybe I need to auction off some of my old 
>junk for an outrageous price.
>The current owner says it does not seem to power up when plugged in. I am 
>not sure, this may be one of the older Icom P.S. that are turned on with 
>the on/off switch on the rig.  My 720A & P.S. worked that way, the P.S. 
>was controlled by the rig's power switch.  If you wanted to see if the 
>P.S. was working you had to use a jumper at the P.S. to rig connector plug 
>to substitute for the rigs power switch.
>
>w6omf wrote:
>
>>FYI
>>Icom IC-2KLPS
>>http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=4671&item=5711744826&rd=1

Gary Fiber K8IZ
GROL PG-19-6691
Washington State Resident