[Icom] 756 Pro II / PW-1 CI-V question

Wed, 21 May 2003 22:04:19 -0400

Thanks Julio,
That is exactly how I have it connected... I have also tried the CI V cable
direct to the exciter as well... also tried different CI V cable.
kinda frustrating... also I have the switch set for 1 exciter, not 1&2
Mac, W8XF
----- Original Message ----- 
From: "Julio Peralta" <[email protected]>
To: <[email protected]>
Sent: Wednesday, May 21, 2003 9:52 PM
Subject: Re: [Icom] 756 Pro II / PW-1 CI-V question


> I think you may have it backwards it should be ACC port 2 on the radio and
> ACC-1 on the amp.
>
> Also make sure to use the inboard connectors on the back of the amp, as
they
> are for exciter #1. The far left-hand set of connectors (looking from the
> back of the amp) are for exciter #2.
>
> Julio, W4HY
> ----- Original Message ----- 
> From: "Mac" <[email protected]>
> To: <[email protected]>
> Sent: Wednesday, May 21, 2003 9:25 PM
> Subject: [Icom] 756 Pro II / PW-1 CI-V question
>
>
> > I just unpacked my PW-1... I have the cables exactly as the manuals
show,
> > but my PW-1 is not tracking the 756. I have the CT 17 with the 756 in
port
> 1
> > and the PW-1 in port 2.. I am using DX4Win to control the rig. The
> software
> > controls the 756 fine, but the amp won't follow.
> >
> > I have both the PW-1 and the 756 at 54h... tried diffferent one for
756..
> no
> > help.
> >
> > What have I missed?
> >
> > Mac, W8XF
> >
> >
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom Users Net: Sundays, 1700Z, 14.315 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
>
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/