[Icom] 756 Pro II / PW-1 CI-V question

[Julio Peralta]

I think you may have it backwards it should be ACC port 2 on the radio and
ACC-1 on the amp.

Also make sure to use the inboard connectors on the back of the amp, as they
are for exciter #1. The far left-hand set of connectors (looking from the
back of the amp) are for exciter #2.

Julio, W4HY
----- Original Message ----- 
From: "Mac" <w8xf@arrl.net>
To: <icom@mailman.qth.net>
Sent: Wednesday, May 21, 2003 9:25 PM
Subject: [Icom] 756 Pro II / PW-1 CI-V question


> I just unpacked my PW-1... I have the cables exactly as the manuals show,
> but my PW-1 is not tracking the 756. I have the CT 17 with the 756 in port
1
> and the PW-1 in port 2.. I am using DX4Win to control the rig. The
software
> controls the 756 fine, but the amp won't follow.
>
> I have both the PW-1 and the 756 at 54h... tried diffferent one for 756..
no
> help.
>
> What have I missed?
>
> Mac, W8XF
>
>
> ----
> Your Moderator: Dick Flanagan W6OLD, icom-owner@mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/
>