[Icom] RE: 706MKIIG - No Output

Mon, 17 Mar 2003 07:07:42 -0700

The fuse is ok. So obviously the expensive finals are there to protect the
inexpensive fuse.

Art

----- Original Message -----
From: "Tony Hwang" <[email protected]>
To: <[email protected]>
Sent: Sunday, March 16, 2003 9:10 PM
Subject: Re: [Icom] RE: 706MKIIG - No Output

> Hi,
> Shouldn't fuse blow B4 finals go? At least that's what I'd think.
> If the final is getting hot drawing high current, that is not a good sign.
> 73, GL
> Tony, VE6CGX
>
> James Vohland wrote:
>
> > Hope you can get it working but am sure you have tried all the cpu
> > reset, etc etc. I had similar problems with mine and I had blown
> > finals. Trip to Washington and Icom fixed that and now back in
> > business. Good Luck.
> >
> >
> >
> >
> >
> >
> >> From: "Arthur Prewitt" <[email protected]>
> >> Reply-To: [email protected]
> >> To: <[email protected]>
> >> Subject: Re: [Icom] RE: 706MKIIG - No Output
> >> Date: Sun, 16 Mar 2003 20:11:51 -0700
> >>
> >>
> >> .Hi All,
> >>
> >> I have a IC-706MKIIG. No output 160 through 6 Meters ok on 2 and 70cm.
.
> >> Draws a lot of current on xmit but no output.
> >>
> >> Is this a common failure mode? Any words of wisdom.
> >>
> >> Art
> >>
> >> ----
> >> Your Moderator: Dick Flanagan W6OLD, [email protected]
> >> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> >> Icom FAQ: http://www.qsl.net/icom/
> >
> >
> >
> > _________________________________________________________________
> > STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
> > http://join.msn.com/?page=features/junkmail
> >
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom Users Net: Sundays, 1700Z, 14.315 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
>
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/