[Icom] RE: 706MKIIG - No Output

Sun, 16 Mar 2003 21:10:06 -0700

Hi,
Shouldn't fuse blow B4 finals go? At least that's what I'd think.
If the final is getting hot drawing high current, that is not a good sign.
73, GL
Tony, VE6CGX

James Vohland wrote:

> Hope you can get it working but am sure you have tried all the cpu 
> reset, etc etc. I had similar problems with mine and I had blown 
> finals. Trip to Washington and Icom fixed that and now back in 
> business. Good Luck.
>
>
>
>
>
>
>> From: "Arthur Prewitt" <[email protected]>
>> Reply-To: [email protected]
>> To: <[email protected]>
>> Subject: Re: [Icom] RE: 706MKIIG - No Output
>> Date: Sun, 16 Mar 2003 20:11:51 -0700
>>
>>
>> .Hi All,
>>
>> I have a IC-706MKIIG. No output 160 through 6 Meters ok on 2 and 70cm. .
>> Draws a lot of current on xmit but no output.
>>
>> Is this a common failure mode? Any words of wisdom.
>>
>> Art
>>
>> ----
>> Your Moderator: Dick Flanagan W6OLD, [email protected]
>> Icom Users Net: Sundays, 1700Z, 14.315 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>
>
>
> _________________________________________________________________
> STOP MORE SPAM with the new MSN 8 and get 2 months FREE*  
> http://join.msn.com/?page=features/junkmail
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/
>