[Icom] IC-765 tuning noise

Wed, 12 Mar 2003 16:48:54 -0800

Thanks for the tip Bill. I was working on the rig in just that area -=20
actually the board where the band buttons are located - and I'll go back=20
and tighten up all of the mounting screws.

Larry

At 03:39 PM 3/12/2003 -0600, you wrote:
>Hi Larry,
>
>My 765 did it also until I tightened up all of the board to chassis
>mounting screws. I understand this is the standard Icom fix all for strange
>things that happen.
>
>73
>
>         William J. Diamond (Bill)
>         Rogers, Arkansas USA
>         [email protected]
>
>         Ham Radio Operator WR=D8T
>       Flying The Flag Long Before
>             It Was Popular
>    Please Visit My New Icom Radio Page
>
>  http://pages.sbcglobal.net/wjdiamond/index.html
>
>-----Original Message-----
>From: [email protected] [mailto:[email protected]]On
>Behalf Of Larry
>Sent: Wednesday, March 12, 2003 3:22 PM
>To: [email protected]
>Subject: [Icom] IC-765 tuning noise
>
>
>I have an IC-765 which has a noise each time the display is changed during
>tuning. With each change of the frequency display, there's a very low level
>"whoosh" noise. It's not troubling just annoying. Has anybody experienced
>this and does anybody have an idea how to eliminate it.
>
>Thanks
>73 - Larry W=D8NFU
>[email protected]
>
>----
>Your Moderator: Dick Flanagan W6OLD, [email protected]
>Icom Users Net: Sundays, 1700Z, 14.315 MHz
>Icom FAQ: http://www.qsl.net/icom/
>
>
>----
>Your Moderator: Dick Flanagan W6OLD, [email protected]
>Icom Users Net: Sundays, 1700Z, 14.315 MHz
>Icom FAQ: http://www.qsl.net/icom/