[Icom] PCR 1000 Questions

Thu, 6 Mar 2003 18:29:14 -0600

Hi Larry,

I can't even get into the Bonita program to set the com port, it just gives
a error message saying cannot find radio..;

        William J. Diamond (Bill)
        Rogers, Arkansas USA
        [email protected]

        Ham Radio Operator WR�T
      Flying The Flag Long Before
            It Was Popular
   Please Visit My New Icom Radio Page

 http://pages.sbcglobal.net/wjdiamond/index.html

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Larry
Sent: Thursday, March 06, 2003 6:05 PM
To: [email protected]
Subject: Re: [Icom] PCR 1000 Questions

Do you have the software and RS-232 ports setup to use the same one?

73 - Larry W�NFU
[email protected]

At 05:55 PM 3/6/2003 -0600, you wrote:
>Hi Gang,
>
>Well, I made another giant leap into the digital age with a Icom PCR 1000
>receiver.
>
>I have some questions about it's operation.
>
>This one has the Bonito software with it but it did not have the
connection
>cable from the 1000 to the PC. Icom told me that it was a standard 9 pin
RS
>232 cable so I got one from office Depot today.
>
>The software gets an error and says it cannot find the receiver. I removed
>and reinstalled about 6 times and the same thing.
>
>I DL the Icom software from their site set the software to Com 2 and it
>works.
>
>The software that came with it still will not.
>
>Anyone run into this before?
>
>Since it does not use 6146's I am kinda lost..
>
>Thanks
>
>         William J. Diamond (Bill)
>         Rogers, Arkansas USA
>         [email protected]
>
>         Ham Radio Operator WR�T
>       Flying The Flag Long Before
>             It Was Popular
>    Please Visit My New Icom Radio Page
>
>  http://pages.sbcglobal.net/wjdiamond/index.html
>
>
>----
>Your Moderator: Dick Flanagan W6OLD, [email protected]
>Icom Users Net: Sundays, 1700Z, 14.315 MHz
>Icom FAQ: http://www.qsl.net/icom/

----
Your Moderator: Dick Flanagan W6OLD, [email protected]
Icom Users Net: Sundays, 1700Z, 14.315 MHz
Icom FAQ: http://www.qsl.net/icom/