[Icom] Computer keying of Icom 751A using K1EA CT Software

Tue, 17 Jun 2003 22:38:07 +0600

I use IC751A with TR log for years. It appears you have forgotten to switch
the internal keyer off.

73, Igor UA9CDC
----- Original Message -----
From: "W0YG Charlie Summers" <[email protected]>
To: "Icom Reflector" <[email protected]>
Sent: Tuesday, June 17, 2003 7:03 PM
Subject: [Icom] Computer keying of Icom 751A using K1EA CT Software

> Never had a problem making up a cable for keying a rig before but the Icom
> 751A is giving me a bit of a problem.  I made up both a serial and a
> parallel cable yet both produce the same results, unintelligible CW!  The
> Icom key input wants to see a three part plug with ring and tip connected
to
> the keying circuit.  When I hook the computer to the rig and attempt to
test
> a buffer, this is where the problem starts.
>
> Anyone out there seen this before?
>
> 73,
>
> Charlie, W0YG..>>
>
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/