[Icom] Icom PS-125

Fri, 25 Jul 2003 12:26:43 -0500

$7.50 or so in parts for a longer cord to modify a power supply that came
free in the first place--not a bad deal. Even as a self-admitted "appliance
operator", I think I could handle that. ;-)
Andy K5VM

----- Original Message -----
From: "Steve" <[email protected]>
To: <[email protected]>
Sent: Friday, July 25, 2003 12:01 PM
Subject: Re: [Icom] Icom PS-125

| Charlie,
|
| I agree with you. I have better uses for the deskspace occuppied by the
| loaf-of-bread sized power supply, quiet or not!
|
| I checked with Icom and here's the response I received: We sell the
| connectors and the pins through our parts department.  The
| connector for the "chassis" side is:  93602666 and the "cable" side is:
| 93606287.  The pins are sold "each" and they are as follows:  "chassis"
| side is:  93602725 and the "cable" side is:  93602726.  You can contact
| the parts department at:  [email protected].  Hope this will help.
| Best Regards; Mike Hilton Technical Support Representative
|
| So . . . I called their parts department and learned all the items are
| in stock but that the part numbers have changed. Here's the information
| I received from Ellen at Icom parts:
|
| "Chassis" side connector was 93602666 and changed to 6510003780, $1.74.
|
| "Cable" side connector was 93606287 and changed to 6510003770, $1.20.
|
| "Chassis" connector pin was 93602725 and changed to 6510007650, 20 cents.
|
| "Cable" connector pin was 93602726 and changed to 6510003790, 27 cents.
|
| There's a $4.00 shipping and handling charge.
|
| Hope this helps.
|
| 73,
|
| Steve
| K8JQ
|
| W0YG Charlie Summers wrote:
| > The problem is I don't want the PS-125 on the desk and Icom supplies too
| > short a cable.  So, I want to and have asked for suggestions about
extending
| > the cable.  George, W5YR, instead of telling me, or others who have also
| > indicated it is too short for them,  it is just right for you,  how
about
| > giving us some hints on where to get connectors to extend the cable.
The
| > proper place for this power supply in my shack is under the table.  It
| > obviously is not the same for you.
| >
| > One suggested Powermax but I hit a dead end there.  Maybe a Male inline
| > connector is not available???
| >
| > BTW, that PS-125 is extremely noisy when the fan comes on.  Others have
| > indicated the same.  My shack is stone cold quiet.  That fan shatters
that
| > quietness.
| >
| > 73,
| >
| > Charlie, W0YG..>>
| >
| > ----
| > Your Moderator: Dick Flanagan W6OLD, [email protected]
| > Icom Users Net: Sundays, 1700Z, 14.315 MHz
| > Icom FAQ: http://www.qsl.net/icom/
| >
|
|
| ----
| Your Moderator: Dick Flanagan W6OLD, [email protected]
| Icom Users Net: Sundays, 1700Z, 14.315 MHz
| Icom FAQ: http://www.qsl.net/icom/