[Icom] Icom PS-125

Steve [email protected]
Fri, 25 Jul 2003 13:01:08 -0400


Charlie,

I agree with you. I have better uses for the deskspace occuppied by the 
loaf-of-bread sized power supply, quiet or not!

I checked with Icom and here's the response I received: We sell the 
connectors and the pins through our parts department.  The
connector for the "chassis" side is:  93602666 and the "cable" side is:
93606287.  The pins are sold "each" and they are as follows:  "chassis"
side is:  93602725 and the "cable" side is:  93602726.  You can contact
the parts department at:  [email protected].  Hope this will help.
Best Regards; Mike Hilton Technical Support Representative

So . . . I called their parts department and learned all the items are 
in stock but that the part numbers have changed. Here's the information 
I received from Ellen at Icom parts:

"Chassis" side connector was 93602666 and changed to 6510003780, $1.74.

"Cable" side connector was 93606287 and changed to 6510003770, $1.20.

"Chassis" connector pin was 93602725 and changed to 6510007650, 20 cents.

"Cable" connector pin was 93602726 and changed to 6510003790, 27 cents.

There's a $4.00 shipping and handling charge.

Hope this helps.

73,

Steve
K8JQ

W0YG Charlie Summers wrote:
> The problem is I don't want the PS-125 on the desk and Icom supplies too
> short a cable.  So, I want to and have asked for suggestions about extending
> the cable.  George, W5YR, instead of telling me, or others who have also
> indicated it is too short for them,  it is just right for you,  how about
> giving us some hints on where to get connectors to extend the cable.  The
> proper place for this power supply in my shack is under the table.  It
> obviously is not the same for you.
> 
> One suggested Powermax but I hit a dead end there.  Maybe a Male inline
> connector is not available???
> 
> BTW, that PS-125 is extremely noisy when the fan comes on.  Others have
> indicated the same.  My shack is stone cold quiet.  That fan shatters that
> quietness.
> 
> 73,
> 
> Charlie, W0YG..>>
> 
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/
>