[Icom] which is better? IF or AF dsp filters

[Julio Peralta]

Adam does that extend to the IC-910H? Is the add on DSP also of the AF type
and limited in it's fuctionabilty?

Julio, W4HY
----- Original Message -----
From: "Adam Farson" <farson@shaw.ca>
To: <icom@mailman.qth.net>
Sent: Tuesday, January 21, 2003 2:19 PM
Subject: RE: [Icom] which is better? IF or AF dsp filters


> Hart,
>
> IF-DSP filters are the way to go - especially if they are inside the AGC
> loop, as is the case in the IC-756Pro/Pro II and IC-746Pro (IC-7400).
>
> Less expensive HF transceivers such as the IC-706 Mk IIG and the IC-718
are
> supplied with an optional AF DSP module, which offers limited
> functionality - noise reduction and auto-notch. The main IF filters are
> crystal  and ceramic types.
>
> Best 73,
> Adam, VA7OJ/AB4OJ
> North Vancouver, BC, Canada
> http://www.qsl.net/ab4oj/
> Icom FAQ site:
> http://www.qsl.net/icom/
>
>
>
>
>
> ----
> Your Moderator: Dick Flanagan W6OLD, icom-owner@mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/
>