[Icom] IC-746 with PSK 31

[W8OKN]

Excellent.  Beyond the cable, were there additional hardware requirements?
I have a 718 and wish to connect it directly to my laptop with a homebrew
soldered cable.

Sean
W8OKN

----- Original Message ----- 
From: "Bill Conkling" <conk@widomaker.com>
To: <icom@mailman.qth.net>
Sent: Wednesday, February 12, 2003 8:36 AM
Subject: Re: [Icom] IC-746 with PSK 31


> I have a 735 and used the acc1 connector for conecting my sound card
> interface.  It works very well.
>
> .........bc    (conk@widomaker.com
>
>        http://www.widomaker.com/~conk
> Williamsburg, VA 23185
>
>
> On Tue, 11 Feb 2003, J. Benedict wrote:
>
> > Hi!
> >
> > I'm starting to get into PSK 31 and was reading the manual about ACC
> > 1 on the back.  On paper, that looks like the best way to wire up the
> > 746 to work with the sound card programs- even simpler than using a
> > RigBlaster.
> >
> > I've hooked up to the extension speaker to try it out on receive and
> > I'm amazed at the kids of things I have been able to hear, uh, see! ;)
> >
> > Anyone have experience using the ACC 1 to hook up for PSK 31 (or, for
> > that matter, any of the sound card programs)?
> >
> > 73
> >
> > Jeff KB7AIL.
> > --
> > Jeffrey E. Benedict                     raoul@olympus.net
> >
> > _______________________________________________________________________
> > "Ignorance is a powerful tool if applied at the right
> > time, even usually surpassing knowledge..."
> >                    - E.J. Potter, "The Minnesota Madman"
> > _______________________________________________________________________
> >
> > ----
> > Your Moderator: Dick Flanagan W6OLD, icom-owner@mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.315 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
>
> ----
> Your Moderator: Dick Flanagan W6OLD, icom-owner@mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/