[Icom] IC-735 low power output

[icom@mailman.qth.net]

You have verified that the correct relay closes for each band.....  BUT,
did you verify that there isn't another one closed at the same time?  My
first guess is that the filter for 10M is in all the time.

Ed
K1ZOK

On Fri, 31 Jan 2003 19:04:29 EST W1JJM@aol.com writes:
> I have a IC-735 that has low power output. It varries as to the band 
> that is 
> being used. It has full output on 10 mtrs but go as low as 20 watts 
> on other 
> bands. I have check the relays in the band pass filter and they all 
> are OK 
> and switch on correctly for the band in use. If I by-pass the band 
> pass 
> filter and look at the output from the PA into a dummy load I have 
> full out 
> put on all bands. Any idea's?
> 
>                      Mick   W1JJM
> 

________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com