[Icom] Off topic but HELP!!!!!!!!!!!!!!!

Mon, 28 Apr 2003 17:33:21 -0700

There is a psk 31 reflector, the builder of the rigblaster even hangs out
there.
Sorry wish I could help more.
don  w5djw

----- Original Message -----
From: "Tony Hwang" <[email protected]>
To: <[email protected]>
Sent: Sunday, April 27, 2003 8:46 PM
Subject: Re: [Icom] Off topic but HELP!!!!!!!!!!!!!!!

> Hi, Tom
> Try moving the cable to " line out"  jack on the sound card.
> No manual for Rigblaster there?
> 73,
> Tony, VE6CGX
>
> Tom Johnson wrote:
>
> >I am using an IC746PRO and rigblaster that was hooked up for me by a
friend.
> >Last week, I was moving the rig on the desk, and somehow the cable going
to
> >the mic connector on the sound card pulled loose and I can't find how or
> >where it was connected at the rig.
> >
> >I now have the audio connected into the speaker line and have the
rigblaster
> >working again, but it is always "on" now. Even with MTTY turned off, I
still
> >have receive audio coming through the computer speakers. I have to mute
the
> >mic to use the computer for anything else. Prior to this episode, audio
> >never came out of the speakers when MTTY was running except on transmit,
> >only the display worked on receive. Obviously, I have hooked it up wrong.
> >
> >Is anybody running a rigblaster with a 746PRO or a plain old 746 who can
> >tell me where the input audio should connect? I am partially disabled,
but
> >should be able to fix this if I can locate it.
> >
> >Thanks
> >
> >Tom
> >
> >N4TJ
> >
> >
> >----
> >Your Moderator: Dick Flanagan W6OLD, [email protected]
> >Icom Users Net: Sundays, 1700Z, 14.315 MHz
> >Icom FAQ: http://www.qsl.net/icom/
> >
> >
> >
>
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/
>