[Icom] Off topic but HELP!!!!!!!!!!!!!!!

[Tony Hwang]

Hi, Tom
Try moving the cable to " line out"  jack on the sound card.
No manual for Rigblaster there?
73,
Tony, VE6CGX

Tom Johnson wrote:

>I am using an IC746PRO and rigblaster that was hooked up for me by a friend.
>Last week, I was moving the rig on the desk, and somehow the cable going to
>the mic connector on the sound card pulled loose and I can't find how or
>where it was connected at the rig.
>
>I now have the audio connected into the speaker line and have the rigblaster
>working again, but it is always "on" now. Even with MTTY turned off, I still
>have receive audio coming through the computer speakers. I have to mute the
>mic to use the computer for anything else. Prior to this episode, audio
>never came out of the speakers when MTTY was running except on transmit,
>only the display worked on receive. Obviously, I have hooked it up wrong.
>
>Is anybody running a rigblaster with a 746PRO or a plain old 746 who can
>tell me where the input audio should connect? I am partially disabled, but
>should be able to fix this if I can locate it.
>
>Thanks
>
>Tom
>
>N4TJ
>
>
>----
>Your Moderator: Dick Flanagan W6OLD, icom-owner@mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.315 MHz
>Icom FAQ: http://www.qsl.net/icom/
>
>  
>