[Icom] IC-765 cabinet screws

K8CM [email protected]
Wed, 09 Apr 2003 20:52:40 -0400


I use the Radio Shack #276-320 White LED.  I was incorrect on the 
voltage  ...  I thought it was 3.1 volts whereas it is 3.6 volts.  Luminous 
intensity is 1100mcd @ 20mA current.  As I said, mine are running at 10mA 
and provide more light than did the 25mA incandescent lamp it replaced.

Don't remember the cost and its not marked on the card.

73 <> Carl
     K8CM

At 12:33 AM 4/10/2003 +0000, you wrote:

>I have never found an LED that could match the brightness of a standard
>bulb.  Has someone come up with a good part number of some that are?
>
>OTOH, I have heard of LED replacement lamps that have 4 or 5 LED junctions
>in one package and run on 12v.  I have searched Digi-Key, Mouser, etc....
>but have not found any.  Has anyone?
>
>Mike.  KD9KC
>El Paso. TX.
>
>
>----
>Your Moderator: Dick Flanagan W6OLD, [email protected]
>Icom Users Net: Sundays, 1700Z, 14.315 MHz
>Icom FAQ: http://www.qsl.net/icom/