[Icom] 761 Questions

Sun, 06 Apr 2003 19:13:59 -0600

Hi,
Do you have enough drive? If finals are bad, it'll get unusually hot. 
Using dummy load for testing?
In the case of 765 I have, there is a pot on the logic board which can 
adjust the o/p level.
73,
Tony, VE6CGX

wjdiamond wrote:

>Hi All,
>
>I am in the process for repairing a sick IC 761, I only have about 25 to 30
>watts out but a little more on SSB.  I am not real familiar with the SS
>rigs and I sure can't find the 6146's in it.
>
>Is there a simple test procedure on the PA unit?
>
>Thanks in advance to the experts....
>
>        William J. Diamond (Bill)
>        Rogers, Arkansas USA
>        [email protected]
>
>        Ham Radio Operator WR�T
>      Flying The Flag Long Before
>            It Was Popular
>   Please Visit My New Icom Radio Page
>
> http://pages.sbcglobal.net/wjdiamond/index.html
>
>
>----
>Your Moderator: Dick Flanagan W6OLD, [email protected]
>Icom Users Net: Sundays, 1700Z, 14.315 MHz
>Icom FAQ: http://www.qsl.net/icom/
>
>  
>