[Icom] Greetings - AH4 question

[Brian Carling]

Thanks Cletus - well I hope I didn't damage the AH-4.

If ONLY someone had TOLD me to use ANT-1 in the first place!

I have been using ANT 2 the whole time!

On 21 Sep 2002 at 15:38, Cletus W Whitaker wrote:

> de WB2CPN South Central Pennsylvania    2002.09.21
> 
> First, lets make sure that you have the AH-2 control cable,
> (four pins), connected to the IC-746.  Then, make sure that
> the control cable is connected properly at the AH-2. And
> then, make sure the coax from the AH-2 is connected to Ant
> One of the IC-746.  Now, the IC-746 detects the AH-2 being
> connected to the four-pin socket, so the IC-746 bypasses its
> internal auto-tuner, and operates the AH-2.  If your internal
> tuner is running that means the IC-746 does not know the AH-2
> is there.  Or worse case, the AH-2 is broke.  (The IC-746
> detects the AH-2 by monitoring the current that goes to it.
> I've been using the AH-2 and AH-4 for years. 
>           Keep us posted....    73  Clete
> ----
> Your Moderator: Dick Flanagan W6OLD, icom-owner@mailman.qth.net
> Icom FAQ: http://www.qsl.net/icom/