[Icom] 756pro split problem

Thu, 12 Sep 2002 08:41:45 -0400

I'd suggest a CPU reset Ken...I had a similar problem with an ic-706 a few
years back...a reset did it
73, Warren W1GUD
----- Original Message -----
From: "Ken Eigsti" <[email protected]>
To: <[email protected]>
Sent: Thursday, September 12, 2002 7:32 AM
Subject: [Icom] 756pro split problem


> Hi Icomers.
>
> Wonder if anyone has had this problem with the 756 pro. This just happened
> after 2 years of trouble free operation.
>
> PROBLEM:
> I enter split mode (HOLD SPLIT BUTTON TILL BOTH FREQ. ARE EQUAL) Then tune
> the xmit (lower) freq. Now, I hit the MAIN/SUB button to go back to
> recevive on top freq and xmit on bottom. It will NOT GO BACK to the top
> freq. but VFO remains in the TX mode on the lower freq. The VFO remains on
> the lower TX freq.
>
>  If I get out of SPLIT, it will transceive ok on top VFO. All settings
> appear to be normal as per default etc.
>
> Any suggestions?
>
> TNX
> 73 Ken
> W0LSD
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/
>