[Icom] SM-6 mike

[Woody]

Hi Tom:

The control on the bottom of the SM-6 is a microphone level control.  L =
low, H = high.  It sounds like you need to set the control a lot lower.

73,

Woody
KJ4SO

----- Original Message -----
From: "tom johnson" <n4tj@sc.rr.com>
To: "Icom" <icom@mailman.qth.net>
Sent: Wednesday, October 30, 2002 11:01 PM
Subject: [Icom] SM-6 mike


> I picked up a used SM-6 mike a while back, and noticed that there is a
> rotary switch/pot on the bottom, labeled L through H. Without an
instruction
> sheet, I can only guess what this is. Using this mike during the CQWW,
some
> ops would tell me to back off on my compression, even though I wasn't
using
> the compressor.
>
> What is this switch/pot for, and does it control the voice quality? Mine
is
> set atbout three quarter scale towards high. Any info on this would be
> greatly appreciated.
>
> Thanks too, to those who responded to the query about east coast service
> centers. I haven't found anyone yet, but am still looking!
>
> Tom
>
> N4TJ
>
> ----
> Your Moderator: Dick Flanagan W6OLD, icom-owner@mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/