[Icom] PW-1, 756pro, 738 problems.FIXED!! thanks...

Wed, 23 Oct 2002 20:05:42 -0500

just hope this clown never needs anything
forgive me for being human....

----- Original Message -----
From: Matt Erickson <[email protected]>
Date: Wed, 23 Oct 2002 19:01:26 -0500 
To: [email protected]
Subject: Re: [Icom] PW-1, 756pro, 738 problems.FIXED!!  thanks...

> An in-depth reading of the operations manual would have told you what you 
> needed to know, but then it is "easier" to just ask dumb questions.
> 
> At 06:21 PM 10/23/02 -0500, you wrote:
> >I didn't realize there were 2 alc settings on the rear of the amp.
> >All is well and kicking here now ....thanks guys....Steve
> >
> >
> >
> >----- Original Message -----
> >From: Harry Tankin <[email protected]>
> >Date: Wed, 23 Oct 2002 18:57:22 -0400
> >To: [email protected]
> >Subject: Re: [Icom] PW-1, 756pro, 738 problems....
> >
> >
> > > Steve,
> > >
> > > Did you adjust the ALC on the PW1 to accommodate the 738?  If not, give
> > > that a try.
> > >
> > > Harry
> > >
> > >
> > >
> > > ----- Original Message -----
> > > From: Steve Narducci <[email protected]>
> > > Date: Wednesday, October 23, 2002 6:36 pm
> > > Subject: [Icom] PW-1, 756pro, 738 problems....
> > >
> > > > I have had my pw-1 married to my pro for several months and just
> > > > got my new opc cable to hook up the 738.  I did a complete
> > > > reseting of the pw-1 and did the 2 rig setting as shown in the
> > > > manual.  My pro works fine with the amp and all is well, the 738
> > > > appeared to be fine and it is now married to the amp and follows
> > > > bands tunes and all. However when i activate the amp, my power is
> > > > low and delayed with the 738.  Watching the output of the 738 is
> > > > only 10 watts, and there is a delay of the power going into the
> > > > pw1 (if I let it set for 2 seconds, there is no delay).  When I
> > > > turn the amp off, no problems, full 100 watts out.
> > > > Both rigs are set to 9600 baud, the civ address is set to 54h on
> > > > the 738.  Am I doing something wrong?  Thank you...Steve
> > > > --
> > > > __________________________________________________________
> > > > Sign-up for your own FREE Personalized E-mail at Mail.com
> > > > http://www.mail.com/?sr=signup
> > > >
> > > > ----
> > > > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > > > Icom Users Net: Sundays, 1700Z, 14.315 MHz
> > > > Icom FAQ: http://www.qsl.net/icom/
> > > >
> > >
> > > ----
> > > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > > Icom Users Net: Sundays, 1700Z, 14.315 MHz
> > > Icom FAQ: http://www.qsl.net/icom/
> > >
> > >
> >
> >--
> >__________________________________________________________
> >Sign-up for your own FREE Personalized E-mail at Mail.com
> >http://www.mail.com/?sr=signup
> >
> >----
> >Your Moderator: Dick Flanagan W6OLD, [email protected]
> >Icom Users Net: Sundays, 1700Z, 14.315 MHz
> >Icom FAQ: http://www.qsl.net/icom/
> 
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 
> 

-- 
__________________________________________________________
Sign-up for your own FREE Personalized E-mail at Mail.com
http://www.mail.com/?sr=signup