[Icom] Mobile Noise Supression - Final Chapter

[Oceana Radio]

Doug, THANK YOU for quieting down our neighborhoods :-) Very sorry all
that work did nothing for your problem, but you sure made a stealth
vehicle to neighboring stations as you pass by! Cheers, Jack

"Davies, Doug A FOR:EX" wrote:
>
> Power to rig goes directly to battery with fuses in both lines, both lines
> have snap-on ferrite beads.
> Bonded all body parts to the frame
> Bonded engine block to the frame
> Bonded exhaust pipe to the frame
> Put large value cap (40,000uF@100V) across alternator terminals.
> Put filter in pos. alternator line
> Put filters in both lines of the fuel pump
> Put large snap-on ferrite bead on wire bundle exiting main computer.
> Put snap-on ferrite beads on both ends of antenna coax.
> Put ferrite beads on both ends of antenna adjustment power cable.
> Checked that spark plug wires are silicon low emmision type - they are
> Checked that plugs are resistive type - they are.

-- 
Jack Painter
Virginia Beach, Virginia
http://members.cox.net/223bthp/OceanaRadio
BC-895XLT       log periodic beam w/9913 feed, scan*star-d
Pro-2005,2045   scantenna discone w/9913 feed     
Icom-R71A,R-72  high wires, scancat-g-se