[Icom] IC 756Pro, PW1 and CT-17

Sat, 30 Nov 2002 13:19:43 -0700

Actually, the PW-1 only polls every ten seconds so it really isn't the
problem.  And I am unaware of any way to prevent this.  The PW-1
*REQUIRES* that TRANSCEIVE be set.

Last time I tried disabling polling on the logging program it caused
problems.  But that was several releases ago on the software so it may
well function correctly now.  I'll check.

73,
Mike WA0SXV

-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Dave, AA6YQ
Sent: Saturday, November 30, 2002 12:40
To: [email protected]
Subject: RE: [Icom] IC 756Pro, PW1 and CT-17

If your transceiver's "CI-V Transceive" parameter is set to "on", then
the
transceiver will broadcast its current frequency and mode anytime they
change due to either front-panel action or due to a directive received
from
a logging or rig-control program. That being the case, it should not be
necessary for either your logging program or the PW-1 to poll; disabling
polling on either one would eliminate the "clashes" you occasionally
encounter.

    73,