[Icom] IC-756Pro II power off

Fri, 29 Nov 2002 13:31:29 -0600

Years ago, a broadcast engineer told me to always kill power with the 
switch that's easiest to replace, because the switch you use the most is 
always the one that wears out first. It should be easy to replace with 
parts you can easily get, not something you have to special order.

I use a wall switch that feeds an outlet strip, both easily replaced. Also 
easy for my wife to turn off the radios when I go to work and forget to do 
it. :-)

At 12:02 PM 11/29/2002, Ken Kinyon - W7TS wrote:
>Are there any pro's or con's regarding turning the radio on/off with power
>switch on radio, or turning on/off power supply?
>Thanks,
>Ken W7TS
>
>-------------------
>Kenneth E.  Kinyon
>34 Princeton Circle
>Longmont, CO 80503-2106
>Voice: (303) 684-0037
>Fax:  (303) 776-5088
>E-mail: [email protected]
>           [email protected]
>           [email protected]
>ALPCA #8339
>ARRL-LM
>-------------------
>
>-----Original Message-----
>From: [email protected] [mailto:[email protected]]On
>Behalf Of Dick Flanagan
>Sent: Friday, November 29, 2002 10:46
>To: [email protected]
>Subject: Re: [Icom] cluster TNC addresses
>
>
>At 09:34 AM 11/29/2002, someone wrote:
>  >
>  >I need the address of some DX clusters...help would be appreciated
>
>I have responded directly to Sandy.  This topic is closed.
>
>73, Dick
>--
>Dick Flanagan W6OLD OOTC CFII Minden, Nevada
>Visit http://www.cvrc.net
>
>
>----
>Your Moderator: Dick Flanagan W6OLD, [email protected]
>Icom Users Net: Sundays, 1700Z, 14.315 MHz
>Icom FAQ: http://www.qsl.net/icom/
>
>
>----
>Your Moderator: Dick Flanagan W6OLD, [email protected]
>Icom Users Net: Sundays, 1700Z, 14.315 MHz
>Icom FAQ: http://www.qsl.net/icom/