[Icom] Pwr output IC746

Fri, 15 Nov 2002 16:16:34 -0600

Are you using an average reading or peak reading external wattmeter ?

Van,
K0KAV

----- Original Message ----- 
From: "Gary Smith" <[email protected]>
To: <[email protected]>
Sent: Friday, November 15, 2002 4:07 PM
Subject: Re: [Icom] Pwr output IC746

> Lins,
> 
> I have the 746 Pro model and the only time I have
> noticed the SSB power drop off is when the SWR at the
> operating frequency it too high.  Have you checked
> this out?
> 
> 73 de Gary
> WA1TJB
> --- Lins  Berben <[email protected]> wrote:
> > 
> > ----- Original Message ----- 
> > From: Lins Berben 
> > To: [email protected] 
> > Sent: Tuesday, November 12, 2002 9:36 PM
> > Subject: Pwr output IC746
> > 
> > 
> > 
> > Since a few months i have a IC746. But i have a
> > problem in SSB operation.
> > If i talk with normal voice level the the pwr output
> > is to less. Example at maximum pwr (100W), in CW pwr
> > peaks 100W in SSB at normal voice level pwr output
> > peaks only 20-25W, in SSB when i whistle pwr peaks
> > 100W. ( I have other tranceivers and by them the pwr
> > in SSB peaks 80W or more)
> > I did everything what is in the instruction manual.
> > I chanced microfones , handheld and desktop. But
> > still it is the same.
> > What could be the problem?
> > 
> > 73's Lins Berben PA3CMC
> > 
> > 
> > --- StripMime Report -- processed MIME parts ---
> > multipart/alternative
> >   text/plain (text body -- kept)
> >   text/html
> > The reason this message is shown is because the post
> > was in HTML
> > or had an attachment. Attachments are not allowed.
> > Please post in Plain-Text only.---
> > ----
> > Your Moderator: Dick Flanagan W6OLD,
> > [email protected]
> > Icom Users Net: Sundays, 1700Z, 14.315 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> 
> 
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Web Hosting - Let the expert host your site
> http://webhosting.yahoo.com
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/