[Icom] Pwr output IC746

Fri, 15 Nov 2002 14:07:26 -0800 (PST)

Lins,

I have the 746 Pro model and the only time I have
noticed the SSB power drop off is when the SWR at the
operating frequency it too high.  Have you checked
this out?

73 de Gary
WA1TJB
--- Lins  Berben <[email protected]> wrote:
> 
> ----- Original Message ----- 
> From: Lins Berben 
> To: [email protected] 
> Sent: Tuesday, November 12, 2002 9:36 PM
> Subject: Pwr output IC746
> 
> 
> 
> Since a few months i have a IC746. But i have a
> problem in SSB operation.
> If i talk with normal voice level the the pwr output
> is to less. Example at maximum pwr (100W), in CW pwr
> peaks 100W in SSB at normal voice level pwr output
> peaks only 20-25W, in SSB when i whistle pwr peaks
> 100W. ( I have other tranceivers and by them the pwr
> in SSB peaks 80W or more)
> I did everything what is in the instruction manual.
> I chanced microfones , handheld and desktop. But
> still it is the same.
> What could be the problem?
> 
> 73's Lins Berben PA3CMC
> 
> 
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post
> was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> ----
> Your Moderator: Dick Flanagan W6OLD,
> [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/

__________________________________________________
Do you Yahoo!?
Yahoo! Web Hosting - Let the expert host your site
http://webhosting.yahoo.com