[Icom] Fw: IC751A caps mod

Fri, 01 Nov 2002 09:52:34 -0800

Hi Daniel,

Yes, you are correct. A digital voltmeter (DVM) will do the job just as well
as an oscilloscope. I always use a DVM for this procedure.

Cheers for now, 73,
Adam VA7OJ/AB4OJ

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Daniel I. Nieto
Sent: Friday, November 01, 2002 09:18
To: [email protected]
Subject: Re: [Icom] Fw: IC751A caps mod

Adam:
Since the alignment instructions call for an oscilloscope in order to
measure and adjust to 6.5 volts & I do not have one nor could I get my hands
on one easily, do you know if I could use a digital voltmeter instead and
get the same results?. I mean, only to adjust the new caps inside the PLL.
Best regards
Daniel Nieto.
CE3HRX
----- Original Message -----
From: "Adam Farson" <[email protected]>
To: <[email protected]>
Sent: Friday, November 01, 2002 12:58 AM
Subject: RE: [Icom] Fw: IC751A caps mod

> Daniel,
>
> Please go to http://www.qsl.net/icom/manuals.html
>
> Click on "View IC-751A PLL Alignment"
>
> Best 73,
> Adam, VA7OJ/AB4OJ
> North Vancouver, BC, Canada
> http://www.qsl.net/ab4oj/
> Icom FAQ site:
> http://www.qsl.net/icom/
>
>
> -----Original Message-----
> From: [email protected] [mailto:[email protected]]On
> Behalf Of Daniel I. Nieto
> Sent: Thursday, October 31, 2002 18:25
> To: [email protected]
> Subject: Re: [Icom] Fw: IC751A caps mod
>
>
> Matt:
> Thank you so much for your info, I wonder if someone out there has the
> voltage info for the 4 caps in the PLL of the 751A, it would surely help.
> Best regards.
> Daniel Nieto.
> CE3HRX
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/
>

----
Your Moderator: Dick Flanagan W6OLD, [email protected]
Icom Users Net: Sundays, 1700Z, 14.315 MHz
Icom FAQ: http://www.qsl.net/icom/