[Icom] Fw: IC751A caps mod

Fri, 01 Nov 2002 09:47:21 -0800

Daniel,
My scope was acting up and I used a high impedance voltmeter to measure 
the voltages for adjusting the four caps.  Seemed to work OK.
73,
Marsh  NC7V

Daniel I. Nieto wrote:

>Adam:
>Since the alignment instructions call for an oscilloscope in order to
>measure and adjust to 6.5 volts & I do not have one nor could I get my hands
>on one easily, do you know if I could use a digital voltmeter instead and
>get the same results?. I mean, only to adjust the new caps inside the PLL.
>Best regards
>Daniel Nieto.
>CE3HRX
>----- Original Message -----
>From: "Adam Farson" <[email protected]>
>To: <[email protected]>
>Sent: Friday, November 01, 2002 12:58 AM
>Subject: RE: [Icom] Fw: IC751A caps mod
>
>
>  
>
>>Daniel,
>>
>>Please go to http://www.qsl.net/icom/manuals.html
>>
>>Click on "View IC-751A PLL Alignment"
>>
>>Best 73,
>>Adam, VA7OJ/AB4OJ
>>North Vancouver, BC, Canada
>>http://www.qsl.net/ab4oj/
>>Icom FAQ site:
>>http://www.qsl.net/icom/
>>
>>
>>-----Original Message-----
>>From: [email protected] [mailto:[email protected]]On
>>Behalf Of Daniel I. Nieto
>>Sent: Thursday, October 31, 2002 18:25
>>To: [email protected]
>>Subject: Re: [Icom] Fw: IC751A caps mod
>>
>>
>>Matt:
>>Thank you so much for your info, I wonder if someone out there has the
>>voltage info for the 4 caps in the PLL of the 751A, it would surely help.
>>Best regards.
>>Daniel Nieto.
>>CE3HRX
>>
>>----
>>Your Moderator: Dick Flanagan W6OLD, [email protected]
>>Icom Users Net: Sundays, 1700Z, 14.315 MHz
>>Icom FAQ: http://www.qsl.net/icom/
>>
>>    
>>
>
>----
>Your Moderator: Dick Flanagan W6OLD, [email protected]
>Icom Users Net: Sundays, 1700Z, 14.315 MHz
>Icom FAQ: http://www.qsl.net/icom/
>
>  
>