[Icom] PK-232 MBX HELP

Wed, 29 May 2002 16:48:34 -0500

I don't have my 232 hooked up right now Peter, so I'm=0D
going to just take a stab at it!  Usually, your mailbox =0D
uses -1 as an SSID. So, yours would be NH6VB-1. =0D
I don't think that should have any influence on wheather=0D
or not you can connect to anyone though. When you=0D
try to connect, do you see the other station responding?=0D
If not, you could be slightly off freq, or maybe your=0D
tones are too light, or too harsh for the other station to=0D
decode. There is an AFSK level adjustment on the=0D
back of the 232 if your are using AFSK (keying thru=0D
the mic jack). Their are some pactor only commands=0D
that may have to be changed also. I just checked my=0D
manual, and they are not in there as this unit had =0D
the pactor upgrade, and I evidently didn't get the=0D
upgrade commands paperwork. Do a "display" in =0D
the command mode, and it should show you a list=0D
of all the commands avaiable in your 232. =0D
=0D
73 - Mike K9MI=0D
=0D
=0D
-------Original Message-------=0D
=0D
From: [email protected]=0D
Date: Wednesday, May 29, 2002 3:58:24 PM=0D
To: [email protected]=0D
Subject: [Icom] PK-232 MBX HELP=0D
=0D
Hi Gang,=0D
=0D
I am running a IC-706MKIIG with a PAKRATT 232 PK232MBX on PACTOR.=0D
Everything appears to be normal except I cannot connect to another=0D
station. Under MYMAIL I get an error message "ERROR CALL SIGN". How do I=0D
correct this error ?=0D
=0D
Thanks in advance.=0D
73, Peter, NH6VB. ALOHA.=0D
=0D
________________________________________________________________=0D
GET INTERNET ACCESS FROM JUNO!=0D
Juno offers FREE or PREMIUM Internet access for less!=0D
Join Juno today! For your FREE software, visit:=0D
http://dl.www.juno.com/get/web/.=0D
----=0D
Your Moderator: Dick Flanagan W6OLD, [email protected]=0D
Icom FAQ: http://www.qsl.net/icom/=0D
=2E

--- StripMime Report -- processed MIME parts ---
multipart/related
  multipart/alternative
    text/plain (text body -- kept)
    text/html
  image/gif
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---