[Icom] KAM+ to PRO AGAIN!!

Mon, 18 Mar 2002 9:37:43 +0000

Hi Hans!

Correct!
Mni tnx for all!
Best luck with VP6DI

73 de Luis, CT4NH

> 
> De: <[email protected]>
> Data: 18/03/2002 05:44:36
> Para: <[email protected]>
> Assunto: Re: [Icom] KAM+ to PRO AGAIN!!
> 
> Dear Luis,
> 
> You are right! Ground on the ProII is pin 2. 
> 
> The instructions on page 13 of the ProII manual are correct.
> 
> Good luck and 73,
> Hans Remeeus.
> 
> e-mail: [email protected]
> site: www.remeeus.nl
> Ham Radio call: PA1HR
> 
> 
> ----- Original Message ----- 
> From: "Luis Sutil Teixeira" <[email protected]>
> To: <[email protected]>
> Sent: Sunday, March 17, 2002 11:24 PM
> Subject: Re: [Icom] KAM+ to PRO AGAIN!!
> 
> 
> > Hi Hans!
> > 
> > I've checked your wiring instructions according the ACC sockets of my
> > PRO manual and:
> > 
> > KAMPlus pin 2 Gound should connect to Pin 2 (your instruction is pin 5!)
> > Ground (GND) on PRO.
> > I see that pin 5 in PRO is AF (AF detector output)...
> > 
> > Pse confirm
> > 
> > 73 de Luis, CT4NH
> > 
> > ----- Original Message -----
> > From: <[email protected]>
> > To: <[email protected]>
> > Sent: Sunday, March 17, 2002 8:35 PM
> > Subject: Re: [Icom] KAM+ to PRO
> > 
> > 
> > > Dear Luis,
> > >
> > > The right connections are:
> > >
> > >
> > > KAM Plus (HF Radio):                 IC-756ProII (ACC1):
> > >
> > > Pin 5 Transmit audio (FSK) --->   Pin 1 RTTY keying
> > >
> > > Pin 2 Ground ------------------->    Pin 5 Ground (GND)
> > >
> > > Pin 3 Push-to-Talk ------------->   Pin 3 PTT
> > >
> > > Pin 6 Receive audio ----------->    Pin 5 AF (AF detector output)
> > >
> > >
> > > For AFSK you may use:
> > >
> > > KAM Plus (HF Radio):                 IC-756ProII (ACC1):
> > >
> > > Pin 1 Transmit audio (AFSK) -->  Pin 4 MOD (modulator input)
> > >
> > >
> > > I suggest that you combine FSK and AFSK. So, connect Pin 5 from the
> > KAM Plus
> > > to Pin 1 of the ProII and connect Pin 1 from the KAM Plus to pin 4 of
> > the
> > > ProII. In this way you are able to use FSK and AFSK without changing
> > cables
> > > etc.
> > >
> > > By the way. Pin 7 of the ProII is +13,8 Volt with a maximum of 1 A.
> > You may
> > > use this to power your KAM Plus.
> > >
> > >
> > > Good luck and enjoy the combination KAM Plus with ProII!
> > >
> > > 73,
> > > Hans Remeeus PA1HR.
> > >
> > > e-mail: [email protected]
> > > site: www.remeeus.nl
> > > Ham Radio call: PA1HR
> > >
> > >
> > > ----- Original Message -----
> > > From: "Luis Sutil Teixeira" <[email protected]>
> > > To: <[email protected]>
> > > Sent: Sunday, March 17, 2002 5:40 PM
> > > Subject: [Icom] KAM+ to PRO
> > >
> > >
> > > > Hi
> > > > Could someone inform me what are the correct connections between
> > KAM+,
> > > > 8 pin socket and IC756PRO ACC(1) 8 pin socket ?? for RTTY operation.
> > > >
> > > > Tnx de Luis, CT4NH
> > > >
> > > > ----
> > > > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > > > Icom FAQ: http://www.qsl.net/icom/
> > > >
> > >
> > > ----
> > > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > > Icom FAQ: http://www.qsl.net/icom/
> > >
> > 
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom FAQ: http://www.qsl.net/icom/
> > 
> 
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/
> 